Pressure Grouting Machine Price

The Assembly of Pressure Grouting Machine Price:
The assembly sequence of grouting pump shall be reversed according to the disassembly sequence, and the following points shall be paid attention to during assembly:
1. Before assembly, all parts must be cleaned, and the surface of parts should avoid bumping and scratching.
2. The torque of connecting rod bolts should be 60-80nm, and fixed with a stop washer. The gap between connecting rod bearing bush and connecting rod journal should be adjusted properly, and should not be too tight or loose.
3. Roller bearing clearance should be adjusted appropriately.
4. The connection between the external thread of the pull rod end and the internal thread of the crosshead end should be tightened.
5. The skeleton rubber pad at the joint of cylinder liner and pump head, variable speed box and ball cage shall not have cracks or other sealing damages.
6. The gap between piston and cylinder liner should be adjusted properly, not too tight or too loose.
Warning: piston lock tightening efforts to appropriate, too tight will increase the load of pump, the operation difficulty, too loose easily leak slurry!!!!!!
7. The variable speed box of the grouting pump must be filled with lubricating oil. The amount of oil should reach the position of the window, not too little, but not too much.
8. Connection bolts at all parts should be tightened.

Technical parameters of Pressure Grouting Machine Price:

Structure of Pressure Grouting Machine Price:

Pressure grouting machine price is mainly composed of pump body, pump frame, air chamber, shock-resistant pressure gauge, motor, V-belt and pulley cover.

The installation foundation of cement grouting pump should be smooth and not inclined.
The pump is fixed on the foundation with the foot screw to prevent the vibration of the pump during operation.

Preparations before pumping of Pressure Grouting Machine Price:

After the pump has been stopped or reinstalled for a long time, the following preparations must be made before starting.
1. Check whether there is enough lubricating oil in each part.
2. Check whether the suction pipe of the filter is unblocked.
3. Check whether there is obstruction in the movement of each part.
4. Check the accuracy and reliability of the transmission mechanism.
5. Check the looseness of fasteners, especially the screw tightening of rubber piston locking nut, cross head and piston rod connection thread.
6. Check the suction height of the pump. The maximum suction height of the pump should not exceed 2.5 meters in areas below 1000 meters above sea level. In areas above 1000 meters above sea level, the suction height of the pump should be reduced according to the local atmospheric pressure reduction.
7.Check the position of the filter immersed in the mud tank. Generally, the mud level should be below 0.3-0.5 meters, and the filter should be no less than 0.5 meters away from the bottom of the mud tank.

Pictures of Pressure Grouting Machine Price:

Henan Tytion Machinery Co., Ltd is a joint venture enterprise which is mainly offer construction support machine, such as: cement grout pump; high pressure grouting pump; mortar grout pump; hydraulic grouting pump (for two liquid grouting); dry mix shotcrete machine; wet shotcrete machine; concrete pump; tunnel machine; and environment friendly equipment: scrap shear machine and hydraulic baling machine.