| Sign In | Join Free | My himfr.com |
|
Serve Every Client Patiently
4 Years
| Ask Lasest Price | |
| Brand Name : | Tytion |
| Model Number : | PZ-5 |
| Certification : | CE, SGS |
| Price : | negotiation |
| Payment Terms : | Western Union, L/C, T/T |
| Supply Ability : | 180 sets per month |
| Delivery Time : | 5-8 work days |
Large Output Construction Use Small Gunite Machine Dry Mixed Mining
Small Gunite Machine
Replace the New Sealing Plate of Small Shotcrete Machine:
1. With A opener or wrench to pry out the rubber plate;
2. Clean the inner and outer surfaces of the bottom plate;
3. Put the rubber plate in the direction of positioning and turn it
around to the connection position of the transmission key, and
slightly tilt;
4. Press the inclined position with one hand, and gently knock
around with a hammer with the other hand to make the rubber plate
evenly into the bottom plate.
Parameters of Small Shotcrete Machine:
| Technical | Parameters | ||||
| Model | PZ-5 | PZ-6 | PZ-6F | PZ-7 | PZ-9/WSP |
| Throughput(m3/h) | 5-5.5 | 6 | 6-7 | 7 | 9 |
| Transport Distance (Tidal Spray) (m) | 200 | 200 | 200 | 200 | 200 |
| Applicable Material (Cement/Sandstone) Ratio | 1:3～5 | 1:3～5 | 1:3～5 | 1:3～5 | 1:3～5 |
| Applicable Material (Water/Ash) Ratio | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 | ≤0.4～0.45 |
| Aggregate size (mm) | φ20 | φ20 | φ20 | φ20 | φ20 |
| Working Pressure (MPa) | 0.2～0.4 | 0.2～0.4 | 0.6～0.8 | 0.6～0.8 | 0.6～0.8 |
| Feeding height (m) | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 |
| Rotor speed (r/min) | 11 | 11 | 11 | 11 | 11 |
| Motor Power (KW) | 5.5 | 5.5 | 7.5 | 7.5 | 7.5 |
| Motor speed (r/min) | 960 | 960 | 960 | 960 | 960 |
Operation Method of Small Shotcrete Machine:
After the preparation work is finished, the mixing material can be
added to the machine. The machine operator should first open the
main valve, the valve of the upper air duct opens 1/3 circles, and
then adjust the air pressure of the lower air duct (to the cyclone)
to about 0.05-0.1 MPa (depending on the delivery distance). Then
the sprayer opens the nozzle valve and gives the wet rock surface.
At this time, the operator can start the machine and start
shotcreting. Now the working pressure is about 0.2-0.4 MPa.
According to the water-cement ratio of mixtures and the length of
conveying distance, after adjusting and determining the wind
pressure to the cyclone, the upper air pipe valve is opened again
until there is no more material leakage at the machine outlet.
Pictures of Small Shotcrete Machine:
Warehouse of Dry Mix Shotcrete Machine:
|
|
