Screw type smooth operation Wall Plaster Machine Electric driven

Wall Plaster Machine

Operation of Wall Plaster Machine:

1. When it is used for the first time, connect the conveying hose and nozzle, add clear water to the hopper, start the motor and raise the spray gun to fully wet the inner wall of the pipe, to lubricate the hopper, pump body and conveying pipe, and then drain all the water in the pipe, open the water below the hopper and drain it.
2. Add mortar or paint to the hopper to start spraying (start the first bucket of mortar must be dilute some cement to lubricate the inner wall of sandblasting pipe).
3. Idling without material or water in hopper is strictly prohibited.

Parameters of Wall Plaster Machine:

Spraying Material of Wall Plaster Machine:
1. Cement,mortar,putty powder;
2. Paint, latex paint, powder paint;
3. Waterproof material, fireproof material;
4. Thermal insulation, sound-absorbing material,etc.

Features of Wall Plaster Machine:

1. Screw pump,high working pressure, flow stability.

2. Pump and air compressor integration, easy to move

3. High efficiency,save material,low labor intensity.

4. Spray dry powder, mortar and ordinary mortar.

5. Uniform spraying, strong adhesion.

6. Easy to operate,work reliably,long service life.

Pictures of Wall Plaster Machine:

Henan Tytion Machinery Co., Ltd is a joint venture enterprise which is mainly offer construction support machine, such as: cement grout pump; high pressure grouting pump; mortar grout pump; hydraulic grouting pump (for two liquid grouting); dry mix shotcrete machine; wet shotcrete machine; concrete pump; tunnel machine; and environment friendly equipment: scrap shear machine and hydraulic baling machine.