High Pressure Variable Flow Cement Pressure Grouting Pump Nice Performance

Cement Pressure Grouting Pump

Formal grouting operation of Cement Pressure Grouting Pump:
1. Open the grouting valve of the mixer and inject water for 1 minute.
2. If everything is normal, the two suction pipes should be quickly put into the slurry pool to carry out normal grouting operations.
3. After each grouting, if the grouting is not continued, the two suction pipes should be immediately transferred to the clear water tank to clean the remaining slurry in the pump, so as to prevent the slurry solidification caused by a long time and increase unnecessary trouble.
Special tip: after use should be cleaned in time, otherwise it will cause equipment damage!!
4. After the cylinder and the inlet and outlet slurry valve body are cleaned, the suction pipe should be taken out of the water, continue to start the machine, drain the residual slurry in the cylinder and inlet and outlet slurry valve body, and then cut off the power supply.

Parameters of Cement Pressure Grouting Pump:

Working Performance of Cement Pressure Grouting Pump:
This series of manual grouting machines are professional grouting equipment, which can realize both single-liquid grouting and double-liquid grouting. Because of the full hydraulic pressure, small size and light weight, it can be used in a wide range of construction. Good adjustability: the pump's pressure displacement can be arbitrarily adjusted within the design range. When the pressure exceeds the allowable pressure, the relief valve will automatically open and the cylinder and working cylinder will stop working, thus playing a safe role. The motor and air cooler of this series of grouting pump can be used in flammable and explosive construction sites such as coal mines after being replaced with explosion-proof components. A shock-resistant pressure gauge is installed in the hydraulic system, which can accurately reflect the working state of the pump. This series of hydraulic grouting pumps can also be used as water pumps, sewage pumps and mud pumps.

Pictures of Cement Pressure Grouting Pump:

Henan Tytion Machinery Co., Ltd is a joint venture enterprise which is mainly offer construction support machine, such as: cement grout pump; high pressure grouting pump; mortar grout pump; hydraulic grouting pump (for two liquid grouting); dry mix shotcrete machine; wet shotcrete machine; concrete pump; tunnel machine; and environment friendly equipment: scrap shear machine and hydraulic baling machine.